ТОВАРЫ МЕСЯЦА

 

Модуль ICP DAS WISE-7902

Цена: 25840 руб

Если вы нашли товар по более низкой цене – мы готовы поставить его Вам по меньшей стоимости
Артикул: WISE-7902
Доставка: от 800 р. по Москве
Постоянным клиентам и при заказе от 50 000 рублей предоставляются скидки
FRnet Remote I/O PoE Module


Спецификация
System
Процессор 16-bit CPU
SRAM 512 KB
Flash Memory 512 KB
EEPROM 16 KB
Сторожевой таймер Да (0.8 секунд)
NVRAM 31 Bytes
ОС MiniOS7
Часы реального времени RTC Provide seconds, minutes, hours, date of week/month month and year, valid from 1980 to 2079
64-бит ключ Да
Интерфейсы
PoE Ethernet Port RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1 No (Unsupported by WISE firmware)
COM 2 No (Unsupported by WISE firmware)
FRnet Max. 1 M
LED Indicators
System LED Yes (Red)
LED Display -
Special Indicator PoE LED (Green)
Power Requirements
Reserve Polarity Protection Да
Powered from PoE Yes, IEEE 802.3af, Class1
Consumption 1.5 W
Frame Ground Yes (for ESD Protection)
Input Range +12 ~ +48 VDC
Mechanical
Dimensions (W x H x D) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, non-condensing
Functions
Rule Configuration Website Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers Delay / Timing functions
12 Schedules Setup prescheduled routine tasks.
12 Emails Send Email messages to pre-set Email receivers.
12 CGI Commands Send pre-set CGI commands.
12 Recipes Set up THEN/ELSE action groups.
8 P2P remote modules Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel ON, OFF, ON to OFF, OFF to ON, Change
Internal Register =, and lt , and gt , and gt =, and lt = (value)
DI Counter =, and gt , and lt , and gt =, and lt =(value), Change
DO Counter =, and gt , and lt , and gt =, and lt =(value), Change
Timer Timeout, Not Timeout
Schedule In Range, Out of Range
P2P DI, AI, DI counter, DO counter, IR
Rule Status Enable, Disable
THEN / ELSE Actions
DO Channel ON, OFF, Pulse Output
Internal Register Change the value
DI Counter Reset
DO Counter Reset
Timer Start, Stop
Schedule Start, Stop
Email Send
CGI Commands Send
Recipe Execute
P2P DO(On/Off), AO, IR
Rule Status Enable, Disable
х
Забыл пароль