7-channel RTD Input with 3-wire RTD lead resistance elimination WISE PoE Controller (RoHS)
| Спецификация |
| Аналоговый ввод | |
| Количество каналов | 7 (Differential) |
| Тип датчика | Pt100, Pt1000, Ni120, Cu100, Cu1000 |
| Разрядность | 16-бит |
| Частота выборки | 12 Samples/Sec. (Total) |
| Точность | +/-0.05% |
| Дрейф нуля | +/-0.5 |
| Дрейф шкалы | +/-20 |
| Подавление синфазной составляющей | 150 dB |
| Normal Mode Rejection | 100 dB |
| Обнаружение обрыва | Да |
| Индивидуальная конфигурация канала | Да |
| Проводное подключение | 2/3 wire |
| Входное сопротивление | and gt 1M |
| 3-проводной RTD | Да |
| System | |
| Процессор | 16-bit CPU |
| SRAM | 512 KB |
| Flash Memory | 512 KB |
| EEPROM | 16 KB |
| Сторожевой таймер | Да |
| Интерфейсы | |
| PoE Ethernet Port | 10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X |
| 2 Way Isolation | |
| I/O | 2500 VDC |
| EMS Protection | |
| ESD (IEC 61000-4-2) | 4 kV Contact for each terminal and 8 kV Air for random point |
| EFT (IEC 61000-4-4) | +/-4 kV for Power |
| LED Indicators | |
| PoE | PoE On |
| L1 | System Running |
| L2 | Ethernet Link/Act |
| L3 | Ethernet 10/100M Speed |
| Power Requirements | |
| Reserve Polarity Protection | Да |
| Powered from terminal block | Yes, 12 ~ 48 VDC |
| Powered from PoE | Yes, IEEE 802.3af, Class1 |
| Consumption | 2.6 W |
| Mechanical | |
| Dimensions (W x H x D) | 72 mm x 123 mm x 35 mm |
| Installation | DIN-Rail or Wall mounting |
| Environment | |
| Operating Temperature | -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +80 °C |
| Humidity | 10 ~ 90% RH, non-condensing |
| Functions | |
| Rule Configuration Website | Access Web server on WISE controllers to edit and upload logic rules through web browser. |
| 36 IF-THEN-ELSE Logic Rules | 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions |
| 48 Internal Registers | Hold temporary variables and read/write data via Modbus/TCP address. |
| 12 Timers | Delay / Timing functions |
| 12 Emails | Send Email messages to pre-set Email receivers. |
| 12 CGI Commands | Send pre-set CGI commands. |
| 12 Recipes | Set up THEN/ELSE action groups. |
| 8 P2P remote modules | Set up the connection information for the remote WISE modules. |
| Modbus/TCP Protocol | Real time control and monitoring I/O channels and system status of controllers via SCADA software. |
| IF Conditions | |
| AI Channel | =, and lt , and gt , and gt =, and lt = (value) |
| Internal Register | =, and lt , and gt , and gt =, and lt = (value) |
| Timer | Timeout, Not Timeout |
| P2P | DI, AI, DI counter, DO counter, IR |
| Rule Status | Enable, Disable |
| THEN / ELSE Actions | |
| Internal Register | Change the value |
| Timer | Start, Stop |
| Email | Send |
| CGI Commands | Send |
| Recipe | Execute |
| P2P | DO(On/Off), AO, IR |
| Rule Status | Enable, Disable |
ПЛК, датчики, системы удаленного ввода-вывода, устройства связи с объектом
